Strip Module System RGB - 36, 18 & 12

Above left: installation of Tryka Strip Module 36s at the M Club, Belfast. Installation by PSD Electronics. Pictures courtesy of Wine Inns PLC.
     
 

Product Overview

The Tryka Strip Module colour change system is a totally new concept in producing linear colour changing illumination. The system is totally flexible and can be used for a host of traditional applications and a range of never before possible applications.

The Tryka Linear System has a wide angle beam distribution enabling and can be used for general colour change illumination in applications traditionally requiring neon. The Tryka linear system can be configured for interior or even IP68 exterior applications.

Features

  • Long life - 50,000 hours
  • Deep saturated colours
  • Low energy consumption - 30 watts/m
  • Fully DMX controllable
  • Low profile design
  • Wide angle even illumination
  • Robust construction
  • IP68 options
  • Simple plug & play installation
  • Standard modular lengths
  • Adjustable mounting brackets available
  • Low voltage operation
  • Optimised thermal management
Optical Characteristics
Colour Dominant Wavelength Lumen Output (Lm)
Red 627nm 528
Green 530nm 360
Blue 455nm 1800mW
  • Optical data is shown for 1200mm Module (can be applied pro-rata for 400 and 600 Modules)
  • Typical Lumen maintenance 70% at 50,000 hours at 25ºC ambient temperature
  • For more information on L.E.D. performance request L.E.D. technical datasheet
 
Electrical

Power consumption max when channel at 100%:
Red 12.0 Watts
Green 14.4 Watts
Blue 14.4 Watts
Input Current at full power: 350mA
Maximum Forward Voltage 48VDC
Connection: 3m cable with Molex Micro Fit 3 connector
Compatible Drivers: Modulation Driver
Unit is equipped with thermal sensor which will protect the LEDs from high ambient operating temperature. See Modulation Driver data for full details of mains power requirements and DMX operation.
Products represented here are IEC825 Class 2 for eye safety. Do not stare into the L.E.D. light beam at close range.
Fixtures should only be connected to Tryka approved drivers.
 
Mechanical
Standard lengths:
1200mm, 600mm, 400mm
Finish: Body: Silver anodised aluminium
  Front (interior): Acrylic
  IP68: Resin Lens System
 
Environmental
Ambient temperature: -20 to +40ºC
Maximum body temperature: +75ºC
Mean time to failure at 25ºC ambient: 50,000 hours
Ingress Protection: IP68 (interior IP42)
 
Dimensions
 
Typical Installation
Installation notes:
Modules are supplied with 3m of cable for direct connection to the Modulation Driver or use with the Tryka modular wiring system. In certain exterior installations direct hard wired connections may be required, contact Tryka for more information.
 
Selection Guide
Part Number Description
TEW-RGB1200 Tryka wide angle extrusion 1200mm interior
W = interior system 1200 = 1200mm
R = IP68 system 600 = 600mm
  400 = 400mm

© Tryka L.E.D. Ltd 2003-2007 – Unit 3 Station Works – Shepreth - Nr Royston – Herts – SG8 6PZ – UK
Tel: + 44 (0)1763 260666– Fax: + 44 (0)1763 260700– website: www.tryka.com

As part of our continuous product development we reserve the right
to amend these specifications without prior notice.