IDS Wall Control

(3D view)

 

 

 
 
(IDS Wall Control with Master Dimmer)

(brushed Aluminium fascia)

 

 

 

(IDS Wall DMX Control with Master Dimmer and individual colour dimmers)

 

The IDS Wall Control and IDS Wall DMX Control complement Tryka's range of Intelligent Drive Systems. Capable of running up to 32 IDS-4 or IDS-12 at a time (or more with a DMX Booster), they allow remote recall of any function stored on the Drivers, as well as overall dimming of all LEDs connected to it (the DMX version also offers dimming control of individual LED colours, i.e. Red, Green and Blue).

The IDS Wall Control offers an easy Plug & Play installation: simply link all Drivers to each other via the in/out DMX 5-pin connector and attach the first unit to the Wall Control, to have full and flexible control of over 4600 LEDs from a single point.

The same unit can be either surface or flush mount, for adaptability to different installation specifications. Furthermore a version with brushed Aluminium fascia is available if preferred.

 

Main features:

  • full DMX control of up to 32 Drivers
  • LCD Display for ease of use
  • LCD programme with 6 Modes: Static Colour, Cross Fade, Criss-Cross Fade, Cyclic Wash, Solid Chase, Fade Chase (plus Manual Control Mode in the DMX version)
  • several pre-sets available for each Mode
  • speed control for each Mode
  • store setting in any Mode
  • default scroll setting at start-up for ease of operation
  • hard-wired output
  • easy Plug & Play set-up
  • master dimming control in any mode (plus Red, Green and Blue individual dimming with the DMX version).

Electrical specifications:

  • Input Voltage Range: 230Vac 50Hz
  • Power Consumption: 2VA
  • Input Connection: Hard-wired on installation

Control Output:

  • Output: DMX512
  • Connection: Hard-wired terminal block
  • Master Dimmer: 0-100%
  • For DMX version only: individual dimmer control 0-100% for Red, Green and Blue LEDs

DMX wiring information:

  • Red (positive) to XLR pin number 3
  • Blue (negative) to XLR pin number 2
  • Black (ground) to XLR pin number 1

Mechanical specifications:

  • Mounting: surface or recessed
  • Construction: powder coated steel 1.2mm to IP20
 
Operating ambient temperature : -10° to +40°C
Storage ambient temperature : -20° to +70°C
Case temperature : +65°C
Relative Humidity : 80%
 

600g

(can be surface mount or recessed)

 
Part Number Description
TRY-WALL IDS Wall Control
TRY-WALL-ALU IDS Wall Control with brushed Aluminium fascia
TRY-WALLDMX IDS Wall DMX Control
TRY-WALLDMX IDS Wall DMX Control with brushed Aluminium fascia

© Tryka L.E.D. Ltd 2003-2007 – Unit 3 Station Works – Shepreth - Nr Royston – Herts – SG8 6PZ – UK
Tel: + 44 (0)1763 260666– Fax: + 44 (0)1763 260700– website: www.tryka.com

As part of our continuous product development we reserve the right
to amend these specifications without prior notice.